The Sapsucker Stand is so unique that it was recently granted Patent Pending status. Sapsucker's are built with the highest quality steel and powder-coated allowing them to withstand even the harshest environments.
Utilizing our signature 4x4 post holders, you can put place your Sapsucker Stand wherever you need it to go. You'll feel very secure and stable when you're sitting atop a Sapsucker Stand.
Sapsucker Stands can be set-up just about anywhere in minutes. You will immediately notice how solid these stands are and how much freedom you will have to move around into the best possible shooting position. Use the optional ladder to add the finishing touch.
The Sapsucker Stand ships to the lower 48 states via UPS. You simply add the legs and supports with a quick trip to your local lumber company. Assembly typically takes a newbie about one-hour and we're always here to help in anyway that we can.
Hover over Targets for additional information
Sapsucker is YOUR ultimate hunting accessory. Two years of intensive research and development has paid off with this unique patent pending design. It’s time to upgrade your hunt — to Sapsucker!
Don’t risk your health and safety to unstable hunting stands. You’ve probably seen a bunch of these flimsy hunting stands around — but hopefully you’ve never had to hunt from one of these death-traps.
When you’re 12 feet up in the air — you need a rock-solid hunting stand that you can trust. Sapsucker Stands give you plenty of room to move around so you can position yourself in the best possible shooting position. Sapsucker Stands are custom built with the highest quality steel and powder-coated to withstand the harshest environments for many years to come.
Click through this quick Slide Show to see how easy it is to assemble a Sapsucker Hunting Stand.
Go to your local lumber company and grab four 4x4's and eight 2x4's to use for legs and bracing.
Open the box and layout all of the Sapsucker parts to familiarize yourself with the instructions and drawings.
All the hardware that you'll need is included. Sort the nuts and bolts for easy assembly.
People that have never assembled a Sapsucker Stand before can typically complete the job in about one-hour.
We recommend assembling the Sapsucker Stand in your driveway and then transporting it to desired location.
You'll just need a few simple tools to assemble the Sapsucker. A socket set and a couple wrenches are all that's required.
A cordless drill will come in handy for driving various screws and bolts.
After the Sapsucker is assembled, load everything up and head to the hunting site. Bring along a 6 foot step ladder.
Lay the patent pending Sapsucker Stand on it's side and insert one 4x4 into each corner.
Screw lag bolts into the 4x4's to secure the legs to the Sapsucker Stand. It helps if you start them with a hammer.
Get your hunting buddy to help you walk the Sapsucker Stand to a full upright position.
Attach two 2x4's to each side to stabilize the Sapsucker Stand. It should now be rock-solid and very sturdy.
Attach the ladder using two nuts and bolts and walk up to the top and test out your new hunting stand.
Grab some branches from surrounding trees and insert them into the branch holders to help camouflage your stand.
Your Sapsucker Stand is now complete and you're ready to return during hunting season and bag that trophy buck!
16 - 16